There is this time when you really cannot get yourself to stand the cages, especially after using them long enough. Not getting it? You want to get back to using cleats, so that you can improve the power transfer, increase cadence…blah blah all the good stuff you miss about your peloton cycling shoes.
So, how to remove toe cages for peloton bike? A question that must linger in your brain for you to be here.
How to Remove toe Cages for Peloton Bike?
Removing toe cages from the peloton bike is actually the opposite of installing them on the bike. Don’t know about that too? Look into our step by step guide.
Anyway, let’s skip on how you will get the toe cages off Peloton without consuming much of your time.
You will need the following;
- The Allen wrenches
- Pedal oil (not necessary)
Step by Step Procedure
Stick with me for the complete guide on toe cage removal for peloton bike;
Step 1: Be Off the Bike!
First of all, you have to be off the bike. This will be safe and more efficient.
Step 2: Remove the Straps
When using the toe cages and straps, you have to buckle up the straps. Now, you have to loosen them. Then, pull the straps off the cages, slowly from one loop to the other.
This step, however, comes in handy if the toe clips come with straps. However, there are toe cages that are self-sufficient. They don’t need straps to be effective. In that case, you will simply skip this step, then meet us in step 3.
Step 3: Locate the Toe Cage Bolts
Want to locate the bolts that fix the toe cages to the pedals? Turn the pedal over, so that you are facing the bottom of the pedal.
You will see the tiny bolts where the toe clips are fixed.
Step 4: Unbolt the Bolts
Using the Allen wrench, try unbolting the bolts. If you have used the toe cages for far too long, the bolts might be tighter than you expect. Use the pedal oil to soften the grip on the pedal.
Turn the bolts counterclockwise to loosen them. When they loosen up completely and are coming off, use your hands to fasten the process.
Step 5: Take Off the Toe Cages from the Bike Pedals
Now you can pull the toe cages off the bike pedals. If the toe cages came with the pedal and you now want your peloton pedals, you can remove the pedals.
Use an Allen wrench to loosen the pedals from the crank arm of the bike, one at a go. For the right-side pedal, you have to turn it clockwise to loosen, while for the left pedal, you have to turn it counterclockwise to loosen it.
Now you can install your clipless peloton pedals. Countering the process of removing the pedals, you will get the job done in a few minutes.
Why Do You Need Toe Cages for Peloton?
Toe cages allow you to ride on the peloton bike without cycling shoes. any shoes will be suitable for peloton while using the cages. In this regard, any person can spin on your peloton bike, regardless of their shoe size. Therefore, the cages will help you achieve the dream of having the whole family experience the dream of being on a peloton. More so, you can invite friends over for a competitive ride.
Toe cages have their benefits, but a time comes when you no longer need them. Or, you may want a replacement. Either way, this guide on how to remove toe cages for peloton bike will ensure that you don’t make a mess of yourself and your pedals.
- 5 Best Peloton Bike Cleats for Fearless Stroking!
- 6 Best Peloton Shoes for Wide Feet: Prevent Toe Clogging when Spinning
- Peloton Bike Setup for Beginners: Adjusting Your Bike with Simple Way
- How to Put on Peloton Shoes and Clip Into the Pedal? Easy Trick!
- Are Peloton Shoes True to Size?
- How to Unclip Peloton Shoes from Pedals; Beginners’ Guide
- How to Use Peloton Heart Rate Monitor? Its Simple!
- How to Connect Bluetooth Headphones to Peloton?
- Look Delta Vs Keo Cleats; Which Is Better on Which Bike?